Leon Mk1
Front wheel arch cover: dismantling and fitting |
Removing |
– | Unbolt wheel. Wheel bolts tightening torque 110 Nm |
– | Remove hexagonal bolts -4- |
– | Separate the combination screws -3- from the expanding nuts -2- |
– | Remove wheel arch cover -1- from the wheel arch |
Fitting |
Follow the directions given in reverse order to disassemble, taking the following into account: |
– | Tighten the combination screws -3- to tightening torque 2 Nm, and the hexagonal nuts -4- to tightening torque 3 Nm |