Leon Mk1
| Rear-view mirror: General installation diagram |
| 1 - | Control button |
| q | Fitted to remote control → Item |
| 2 - | Casing |
| q | Remove it at right angles to the door frame |
| q | For this, lever it with tool -T20043- |
| 3 - | Clip |
| 4 - | Torx screw |
| q | 2 Nm |
| 5 - | Tighten bolt |
| q | To move the rear-view manually |
| q | 2 Nm |
| 6 - | Control (manual) |
| 7 - | Glass mirror |
| q | Dismantling: remove the mirror, levering it with tool -T20043-, first at the lower part and then the upper part, protecting the mirror casing against possible damage |
| q | Installing: place the mirror with guide pivots in the housings and fit it by pressing |
| q | Pressure should only be applied to the centre of the mirror. Always use protective gloves |
| 8 - | Mirror housing |
| 9 - | Supplement/foot of mirror |
