Leon Mk1
Front roof mouldings |
Dismantling |
– | Separate the front roof moulding -1- from the securing clips -3- with plastic spatula -U-30800- |
– | Extract the angle bar -5- from the front roof moulding -1- |
– | Heat the bar -2- with the hot air blower -SAT 1416- and remove it from the roof |
Installation |
– | Clean the surface of the bar with benzene -2- which is stuck to the external plate, apply silicone solvent and dry |
– | Remove the protective plastic cover, centre the bar -2-, place it and press strongly. The temperature of the plate and the bar should be approx 40 °C |
– | Replace the securing clips -3- (press the clips with pliers and remove them from the bolts T -4-) |
– | Fit the angled moulding -5- in the front roof moulding -1- |
– | Align the roof moulding and fit it to the securing clips by hitting with the hand |