–
| To open the vehicle, the key has to be pointed towards the vehicle, within the range distance, and the opening button must be pressed briefly -2-. If this is successful, the four indicators will blink for approx. half a second. To lock the vehicle, the close button has to be pressed briefly -1-. |
If the close button -1- is pressed for one second minimum, the antitheft alarm will be activated at the same time. |
The four indicators will blink for some two seconds to indicate that the vehicle is blocked and the anti-theft alarm is activated. |
When the close and open buttons are pressed, the remote control warning lamp will blink. If this warning lamp does not blink, it may be that the battery is spent (if this is the case change the battery). |
If the key battery is changed it is not necessary to synchronize the key again. |
Each time that the vehicle is locked or barred with the radiofrequency remote control, the system code will vary. |
If the keys on the remote control are pressed more than 50 times outside the system range, they keys will have to be quickly pressed twice -1- or -2- to activate the system again. |
|
|
|