| t
| If a non-damaged glass is re-used, just before sticking it again the residue of adhesive sealant paste has to be reduced leaving only 1 + 2mm, without damaging the primer layer or the ceramic layer |
| t
| The residual material serves as an adhesive base for the new leakproof adhesive material which will be applied |
Caution | The sticking contact surface should not be treated with primer or cleaning solution. The sticking contact surface must be kept free of dirt and grease. |
|
| t
| Exception: if the sticking process is not carried out immediately after having reduced the residual adhesive cords, the existing residual material will have to be activated using the toner (blue-topped bottle from repair kit -KR 004 30303-) |
|
|
|
Note!
