–
| Before removing the emblems heat them with the hot air blower -SAT 1416-, approximately to 25ºC, then immediately pull them outwards until free. |
–
| Clean the exterior badge with isopropyl alcohol or heptanol the contact zone of the new emblem, treat the area with a silicone cleaner product and dry it. |
–
| Heat the emblem and the contact zone to some 30ºC, checking with the digital thermometer -SAT 4002-. |
–
| Remove the protective laminate, place the emblem and press with a roller with a force of approximately 5 Kg. |
|
|
|