Leon Mk1
| Lateral protection moulding: replacement |
| 1 - | Moulding protection for the front door |
| q | Auto adhesive |
| q | PP/PDM Material |
| 2 - | Rear wing moulding protection |
| q | Auto adhesive |
| q | PP/PDM Material |
| – | Before removing the lateral protection mouldings, they must be heated using the hot air blower |
| – | Clean the outer plate with petrol, clean with a silicon cleaning product and dry |
| – | Heat the moulding using the hot air blower -SAT 1416- and the contact zone to some 35ºC, using the digital thermometer -SAT 4002- as a reference |
| – | Remove protective sheets, fit the protection moulding and press with the pressure roller -T20098-, with a force of approximately 5 Kg |
| 3 - | Protection strip |
| – | Remove the protection strip just before fitting |
| Measurements: |
| a = 155 mm |
| b = 4.5 mm |
