Leon Mk1
| Central locking system components |
| 1 - | Docking station |
| q | Area of assembly: lower part of strut A; behind the lining of the footrest area. |
| – | Remove the lower lining of strut A → Lower lining of strut A: Removal and fitting; Rep. Gr.70. |
| 2 - | widow riser control unit |
| q | If the convenience system is fitted, the door control unit will go here. |
| q | Integrated in the electric window motor |
| t | Removing: |
| – | Remove the lining of the door → Lining of the door: removal and assembly; Rep. Gr.70. |
| – | Remove the fixing bolts of the window riser motor |
| 3 - | Right Door lock |
| q | The electric central locking is integrated in the door lock module |
| q | Removing: |
| – | Remove the lining of the door → Lining of the door: removal and assembly; Rep. Gr.70. |
| – | Dismantle the door lock → Chapter |
| 4 - | Tailgate lock |
| q | It is fixed by bolts to the tailgate door |
| q | Removing: |
| – | Remove the tailgate lining → Tailgate lining: removing and fitting; Rep. Gr.70 |
| – | Remove the fixing bolts from the lock of the tailgate door |
| 5 - | Tailgate servo motor |
| q | It is fixed by bolts to the tailgate door |
| 6 - | Docking station |
| q | Assembly area: in the area of the rear cross bar under the roof, under the roof lining. |
| – | Remove the moulded interior roof → Interior moulded roof: removing and fitting ; Rep. Gr.70 |
| – | Remove the moulded interior roof → Interior moulded roof with sliding sunroof / deflector: removing and fitting ; Rep. Gr.70 |
| 7 - | Alarm horn |
| q | Area of assembly: in the area of strut C, covered by the lining of strut C |
| 8 - | Left Door lock |
| q | The electric central locking is integrated in the door lock module |
| q | Removal: → Door lining: Removing and fitting ; Rep. Gr.70 |
| – | Remove the door covering |
| – | Dismantle the door lock → Chapter |
| 9 - | Control set |
| q | It is installed in the door lining |
| q | Removing: |
| – | Remove the lining of the door → Lining of the door: removal and assembly; Rep. Gr.70. |
| 10 - | Widow riser control unit |
| q | If the convenience system is fitted, the door control unit will go here. |
| q | Integrated in the electric window motor |
| q | Removing: |
| – | Remove the lining of the door → Lining of the door: removal and assembly; Rep. Gr.70. |
| – | Remove the fixing bolts of the window riser motor |
| 11 - | Central module |
| q | It is fixed to a base below the instrument panel by bolts, above the relay holder |
| 12 - | Docking station |
| q | Area of assembly: lower part of strut A; behind the lining of the footrest area. |
| – | Remove the operating lever and the lower covering of strut A |
| 13 - | Bonnet lock: |
| q | Contact switch for the anti-theft alarm |
| q | Area of assembly: on the lock carrier plate |
| – | Remove the lock from the bonnet |
