Leon Mk1
| Door handle and lock, general overview of fitting |
| 1 - | Door lock |
| q | Removing and installing → Chapter |
| 2 - | Control cable |
| q | Unblocking the lock |
| 3 - | Placement set |
| q | Removal: the handle and the lock cylinder have been removed |
| – | Unscrew the fixing bolt → Item, move the placement set lightly backwards and remove it from the door. |
| 4 - | Securing bolt |
| 5 - | Door handle with base |
| q | Removing and installing → Chapter |
| 6 - | Cover |
| 7 - | Lock cylinder housing |
| q | Removing → Chapter |
| q | The locking cylinder is not offered separately as a spare part. |
| 8 - | Base |
| 9 - | Torx bolts T20 |
| q | If the bolt is loosened, the lock cylinder housing → Item is unblocked, and in this way the placement set → Item may be removed. |
| q | The bolt cannot be screwed in → Item unless the lock cylinder case has been fitted. Otherwise, the retaining ring could fall inside the door |
