Leon Mk1
Rear lockcarrier plate cover: removal and assembly (Cordoba Vario) |
1 - | Lockcarrier plate cover |
q | Removing: |
– | Undo Phillips screws → Item |
– | Dismantle expansion clips → Item |
– | Removal of the lockcarrier plate cover |
2 - | Expanding clip |
q | Two-part |
q | Removal: first remove the interior element |
q | Assembly: insert the exterior element and the interior element, one after another, in the casing hole |
3 - | Cover |
4 - | Star head bolt |
5 - | Fastening ring |
q | When assembling the cover, these should be inserted through the grooves of the cover |
6 - | Joint |
q | After fitting the cover check that the seal is correctly fitted |