Leon Mk1
| Rear shelf compartment: removing and fitting |
Note| When removing the rear shelf compartment it is not necessary to remove the pillar loop from strut C nor the belt end bracket -4- |
| Removing |
| – | Detach the boot side lining → Chapter. |
| – | Unclip the side panel shelf compartment -arrows- |
| – | Unclip the shelf compartment -1- from the heel rest moulding -2- |
| – | Take the belt webbing out through the groove in the shelf compartment and remove |
| Installation |
| Installation is carried out in reverse order. The following should be taken into account: |
Note| The clips should be replaced after assembly |
