Cleaning norms when working in the gearbox |
t
| Thoroughly clean unions and adjacent areas before removing. |
t
| Place removed parts on a clean surface and cover. Use foil or paper. Use only lint-free cloths. |
t
| When the repair is not performed immediately, the components opened must be stored with care or sealed. |
t
| Only fit clean parts: only remove replacement parts from packaging immediately prior to installation. |
t
| Always renew seals, O-rings and gaskets. |
t
| Always replace paper gaskets, completely disposing of the used gasket and thoroughly cleaning the contact surfaces. |
t
| The threads of those bolts fitted using a fixing agent must be cleaned using a wire brush. Then apply locking fluid -AMV 185 101 A1- to bolt threads before installing. |
|
|
|