If in the test drives it is necessary to use the tester units, take note of the following: |
WARNING Accidents can be caused if the driver is distracted by test equipment or if test equipment is not secured. |
Injuries can also be caused if the passenger's airbag is triggered in a collision. |
l
| The use of test equipment while driving causes distraction. |
l
| There is an increased risk of injury if test and measuring equipment is not secured. |
Always secure testing equipment to the rear seat with a strap and have them operated from there by a second person. |
|
Observe the following precautions to avoid possible injury and/or damage to the vehicle: |
WARNING Accidents and injury can be caused if a gear is inadvertently engaged while the engine is running. |
Before working on the vehicle while the engine is running, shift the selector lever into position „P“ and apply the parking brake. |
|
To avoid injury to individuals and/or the destruction of electric and electronic components, the following should be observed: |
t
| Disconnect and connect test and measurement equipment only when the ignition is switched off. |
Caution t
| Observe correct procedure before connecting battery → Rep. gr.27. |
t
| Always switch off ignition before disconnecting or connecting the battery to ensure gearbox control unit is not damaged. |
|
|
|
|