SEAT Workshop Service and Repair Manuals

Installation is carried out in the reverse sequence, when doing this note the following:

• ‒ Check whether the dowel sleeves for centralising engine/gearbox are in the cylinder block, install if necessary.
• ‒ Install intermediate plate.
• ‒ Screw in all bolts on assembly mountings by hand approx. 5...6 turns.
• ‒ Align engine mountings stress-free by rocking.

Note:

Assembly mounting tightening torques

.

Vehicles with manual gearbox

• ‒ Lightly grease input shaft splines with G 000 100.
• ‒ Check clutch and clutch operating mechanism, then install.

=> 5-Speed manual gearbox 006; Repair group 30; Servicing clutch control

• ‒ Connect pipe/hose on slave cylinder and secure with clip:

=> 5-Speed manual gearbox 006; Repair group 30; Assembly overview; hydraulics and clutch release mechanism

• ‒ Attach operating cable to gearbox, adjust if necessary:

=> 5-Speed manual gearbox 006; Repair group 34; Servicing selector mechanism; Removing and installing operating cables

• ‒ Install drive shafts.

=> Running gear; Repair group 40; Servicing drive shafts; Removing and installing drive shafts

• ‒ Install pendulum support:

=> Running gear; Repair group 40; Servicing front wheel mounting; I - Assembly overview, assembly carrier, anti-roll bar, wishbone

Vehicles with air conditioner

• ‒ Installing air conditioner compressor:

=> Heating, Air conditioning; Repair group 87; removing and installing compressor bracket

Vehicles with automatic gearbox

• ‒ Install selector cable on gearbox, adjust if necessary:

=> Automatic gearbox 099; Repair group 37; Servicing selector mechanism

Continuation for all vehicles

• ‒ Install front exhaust pipe => Page , exhaust manifold, front exhaust pipe and catalyst with attachments.
• ‒ Fill with coolant => Page 19-12
• ‒ Adjusting throttle cable => Page 20-12
• ‒ Electrical connections and routing:

=> Current flow diagrams, Electrical fault finding and Fitting locations

• ‒ Match engine electronics control unit to immobilizer:

=> Repair group 24; Simos injection and ignition system; Matching engine electronics control unit to immobilizer.

• ‒ Interrogate fault memory:

=> Repair group 01; Self-diagnosis; Interrogating fault memory