|
Removing and installing parts of cooling system
Removing and installing parts of cooling system
Notes:
-
◆ When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work.
-
◆ Hoses are secured with spring-type clips. In cases of repair only use spring-type clips.
-
◆ When installing coolant hoses route stress-free, so that they do not come into contact with other components (observe markings on coolant connection and hose).
-
◆ For fitting the spring-type clips, assembly tool VAS 5024 is recommended.
Coolant hose connection diagram .
Draining and filling with coolant
Coolant mixture ratios => Page 19-12, draining and filling with coolant
Carry out cooling system leakage check with V.A.G 1274 and adapter 1274/7.
| 
