seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Electronic power control (EPC) > < Removing and installing parts of cooling system
4-cyl. injection engine (2 valve without intermediate shaft), Mechanics
Activated charcoal filter system
Servicing parts of the activated charcoal filter system
 
N20-0413
  • Connections
  • Bracket
    • ◆ For activated charcoal filter
  • Junction piece
  • Vent pipe
    • ◆ From pressure retaining valve on fuel tank
      , item 9
  • Activated charcoal filter
    • ◆ Location: in front right wheel housing
    • ◆ Remove wheel housing liner to remove
  • 10 Nm
  • Throttle valve control part
 
N20-0413
  • Vacuum hose
    • ◆ From crankcase breather valve:

=> Repair group 24; Servicing injection system; Removing and installing parts of injection system

  • Air cleaner lower part
  • Solenoid valve 1 (N80)
    • ◆ The valve will be activated from the engine control unit (pulsed)
    • ◆ Checking:

=> Repair group 01; Final control diagnosis; Performing final control diagnosis

  • Connector
    • ◆ Green, 2-pin
    • ◆ For activated charcoal filter solenoid valve 1 (N80)
  • Vent pipe
    • ◆ To atmosphere
    • ◆ Secured to body
  • O-ring
    • ◆ Renew if damaged

Electronic power control (EPC) > < Removing and installing parts of cooling system