SEAT Workshop Service and Repair Manuals

• Rubber mounting
• Upper coolant hose
• ◆ From thermostat housing
  =>Page 19-8, Pos. 17
• Radiator
• ◆ Removing and installing
  =>Page 19-17
• ◆ After replacing renew entire coolant
• Air intake ducting
• 10 Nm
• Rubber washer
• Reinforcing strip

• 2 pin connector
• ◆ Black
• ◆ For right radiator fan (V35)
• Retaining clip
• ◆ Check seated securely
• ◆ For 2 pin connector
• Right radiator fan (V35)
• ◆ Removing and installing
  =>Page 19-17
• Fan ring
• Intake hose
• ◆ Ensure seated tightly
• Pressure hose
• ◆ Ensure seated tightly

• Secondary air pump motor (V101)
• ◆ Removing and installing =>Page 26-24, Removing and installing parts of the secondary air system
• ◆ Checking:

=> Repair Group 01; Self diagnosis; Final control diagnosis

• 25 Nm
• Retaining clip
• ◆ For intake hose
• 2 pin connector
• ◆ Black
• ◆ For left radiator fan (V7)
• Left radiator fan (V7)
• ◆ Removing and installing
  =>Page 19-17

• Lower coolant hose
• ◆ To thermostat housing
  =>Page 19-9, Item 19
• Connector
• ◆ Black, 3 pin
• ◆ For radiator fan thermo switch
• Radiator fan thermo switch (F18),
  35 Nm
• ◆ Switching temperatures:
  Stage 1
      on: 92...97 °C
      off: 84...91 °C
  Stage 2
      on: 99...105 °C
      off: 91...98 °C