SEAT Workshop Service and Repair Manuals

• Drive shaft
• ◆ For oil pump drive
• Oil pump housing
• 25 Nm
• Gears
• ◆ Checking backlash
  => Fig. 1
• ◆ Checking axial clearance
  => Fig. 2
• Oil pump cover with pressure relief valve
• ◆ Opening pressure: 5.3...5.7 bar
• ◆ Clean strainer if soiled

• 10 Nm
• ◆ Renew
• ◆ Install with locking fluid "D6"
• Oil pressure pipe
• ◆ Coat cylinder block and oil pump housing with AMV 188 001 02
• 10 Nm
• O-ring
• ◆ Renew if damaged

→ Fig. 1    Checking oil pump backlash

    Wear limit: 0.20 mm

→ Fig. 2    Checking oil pump axial clearance

    Wear limit: 0.10 mm