Leon Mk1
Heating unit: removing and installing |
Caution
|
Note!
t | Before disconnecting the battery check anti-theft coding on the radio |
t | If the battery is reconnected check the vehicle equipment (radio, clock, electric comfort system, etc.), following the indications in the Workshop Manual and/or the Operating Instructions |
Removal |
Firstly perform the following operations: |
– | Dismount the dash panel insert: → General body - repairs, assembly work, interior; Rep. Gr.70 |
– | Open cap on expansion tank. |
– | Close the coolant hoses of the engine bay with the tool -U-30042- and detach them from the heat exchanger. |
– | Plug heat exchanger hoses. |
– | Dismount dust and pollen filter including the filter box → Chapter |
– | Unscrew earth connection. |
– | Unscrew the hexagon nuts. |
1 - | Hexagon nut |
q | On the engine bay |
q | 4 units |
q | 4 Nm |
q | With shoulder and rubber washer |
2 - | Bulkhead |
3 - | Heating unit |
q | Heating unit: dismantling and assembling → Chapter |
Installation |
– | Place the heating unit together with the bulkhead and introduce the threaded bolts in the specified holes. |
– | Tighten the hexagon nuts on the bulkhead, from the engine bay. |
– | Connect the coolant hoses to the heat exchanger, on the engine bay. |
– | Mount the dust and pollen filtre → Chapter |
– | Screw earth connection. |
– | Check the coolant level and refill it. |