SEAT Workshop Service and Repair Manuals > Leon Mk1 > Heating, ventilation, air conditioning system | Heating and air conditioning | Air conditioner | Refrigeration agent circuit: repairs | Refrigerant lines of the condenser: Removing and installing

Removal:

–	Empty the refrigerant circuit → Air conditioning - with refrigerant R134a SEAT.

–	Remove the sound proofing → Bodywork, exterior fitting work; Rep. gr.50.

–	Remove the connector -A- from the high pressure sender -B-.

–	Unscrew the bolt -A- (tightening torque: 12 Nm).

–	Remove the refrigerant tubes -B- and -C- from the condenser.

Note

Seal open pipes and connections at compressor with suitable conical caps from the kit -T20017A- (to prevent penetration of dirt and moisture).

SEAT Workshop Service and Repair Manuals