seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Vehicles with air conditioning > < Engine: Removing and installing
Removing: instructions
Removing: instructions
  Note!
For this work it is necessary to remove the battery earth strap. In doing so, check whether the vehicle has a coded radio and, if so, consult the antitheft code.
–  The engine is removed with the gearbox, forwards.
–  With the ignition off, remove the battery earth strap.
–  All wire holders that are opened or cut while removing the engine must be reinstalled in the same place when installing the engine.
–  Remove the soundproofing cover from engine.
–  Remove the fuel supply and return hoses from the fuel filter.
–  Remove the connection line between the intercooler and the intake manifold air intake.
–  Remove the connection line between the air mass meter and the turbocompressor.
–  Remove the battery.
–  Remove the battery support.
–  Remove the connector from the heat switch and the radiator fan.
–  Drain the coolant → Chapter
–  Remove radiator hoses from the engine and the heater with strip clamp pliers -T20029-.
   

Vehicles with air conditioning > < Engine: Removing and installing