SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Example: >
< Valve seats: re-cutting
Leon Mk1
Power unit
3-cyl. diesel engine, mechanics
Engine cylinder head, valve gear
Valve control: Repairing / lve_seats_re-cutting/">Valve seats: re-cutting
Calculate the maximum admissible re-cutting dimension
Calculate the maximum admissible re-cutting dimension
Calculate the maximum admissible re-cutting dimension
–
Introduce the valve and press it hard against the seat.
Note!
If the valve is changed during the reparation, use the new valve for the measurement.
–
Measure the distance
-a-
between the end of the stem and the upper edge of the cylinderhead.
–
Calculate the maximum admissible re-cutting dimension starting with the distance measured
-a-
and the minimum dimension.
Minimum dimensions:
Intake valve 43.4 mm
Exhaust valve 43.2 mm
Distance measured less the minimum dimension = maximum admissible recutting dimension.
Power unit
3-cyl. diesel engine, mechanics
Engine cylinder head, valve gear
Valve control: Repairing / lve_seats_re-cutting/">Valve seats: re-cutting
Calculate the maximum admissible re-cutting dimension
Example: >
< Valve seats: re-cutting