seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine: dismounting > < Removing and positioning the engine

Leon Mk1

Engine cover: Removing and installing.
Engine cover: Removing and installing.
   
Removal:
  Caution
If the removal is not carried out correctly, the brackets of the engine cover on the cylinder head cover may break. Remove engine cover according to following instructions under all circumstances.
–  Pull engine cover upwards in areas of the -arrows- and in the sequence shown. To do this, grip beneath engine cover as far as possible.
  E10-10103
Installation
  Caution
Ensure that the 4 fasteners (ball sockets) are correctly positioned before installing the engine cover panel; if necessary, bring them back into their correct position. Otherwise the engine cover panel will be damaged.
–  Move the secure supports of the engine cover to the correct installation position.
–  Position the engine cover onto the securing points and press the corners into the fasteners.
  N10-10274

Engine: dismounting > < Removing and positioning the engine