seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Enginecrankshaft group, pistons > < Assembly mountings

Leon Mk1

Vehicles with air conditioning/heating: additional instructions and assembly information
Vehicles with air conditioning/heating: additional instructions and assembly information
  Note
t  For removal and installation of the engine there is no need to open the refrigerant circuit.
t  In order to avoid damage to the condenser or the pipes/hoses of the refrigerant, avoid pulling, bending or twisting excessively.
–  Remove the clip/s from the cooling agent hose/s.
–  Remove poly V-belt → Chapter.
   
–  Unplug electrical connector -2- at air conditioner compressor regulating valve -N280-.
–  Remove bolts -arrow-, detach air conditioner compressor -1- with refrigerant lines connected and tie up to front.
  WARNING
The air conditioning refrigerant circuit must not be opened.
To prevent damage to the air conditioning compressor and refrigerant pipes/hoses, ensure that the pipes and hoses are not stretched, kinked or bent.
  A87-10479
–  Suspend the air conditioner compressor above with refrigerant hoses still connected, securing it with the securing tool -T10038- to the lock carrier plate. Take special care not to damage the system.
  E10-10007

Enginecrankshaft group, pistons > < Assembly mountings