seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Poly V-belt system > < Crankshaft

Leon Mk1

B - Fit the fitting deviceT10134 with the sealing flange on the crankshaft flange:
B - Fit the fitting device -T10134- with the sealing flange on the crankshaft flange:
l  The crankshaft flange must be free of oil and grease.
l  The engine should be in TDC cylinder 1.
   
–  Screw the hexagon nut -B- to end of threaded spindle.
–  Press threaded spindle of assembly tool -T10134- in direction of arrow, until hexagon nut -B- lies against assembly housing -A-.
–  Align flat side of assembly housing to crankcase's sealing surface on the oil sump side.
  N13-10045
–  Secure the fitting device -T10134- using the Allen bolts -A- to the crankshaft flange.
  Note
Screw the Allen screws -A- by approx. 5 threads into the crankshaft flange.
  N13-10044
–  To guide sealing flange into cylinder block, screw in 2 M7 × 35 mm bolts -A-.
  N13-10031

Poly V-belt system > < Crankshaft