Leon Mk1
Assembly overview - intake manifold with attachments |
1 - | Exhaust gas recirculation cooler changeover valve -N345- |
2 - | Bolt. |
q | 8 Nm |
3 - | Bolt. |
q | 8 Nm |
4 - | Charge air pressure sender -G31- |
5 - | Seal |
q | Replace |
6 - | Connecting pipe |
q | To cylinder head/exhaust gas recirculation cooler. |
7 - | Bolt. |
q | 9 Nm |
8 - | Clip |
q | 4 Nm |
q | Replace |
9 - | Throttle valve control mechanism -J338- |
10 - | Bolt. |
q | 10 Nm |
11 - | Seal |
q | Replace |
q | Individual seals can also be installed. |
12 - | Intake manifold |
q | With intake manifold flap motor -V157- |
q | With optimised intake air swirl |
q | Must not be dismantled |
13 - | Bolt. |
q | 8 Nm |