Leon Mk1
| Part I Timing belt system - Assembly overview |
| 1 - | Bolt. |
| q | 3 units |
| q | 20 Nm |
| 2 - | Pulley |
| q | For coolant pump |
| q | removing and fitting → Chapter |
| 3 - | Cover |
| 4 - | Tensioner |
| 5 - | Bolt. |
| q | 20 Nm and then turn 90° further |
| 6 - | Alternator |
| 7 - | Guide roller |
| 8 - | Plate |
| 9 - | Pulley |
| q | For crankshaft |
| q | Do not tilt during assembly |
| 10 - | Bolt. |
| q | 150 Nm and then turn 180° further |
| 11 - | Guide sleeve |
| 12 - | Bolt. |
| q | 5 units |
| q | 25 Nm |
| 13 - | Guide sleeve |
| 14 - | Spacer bush |
| 15 - | Poly-V belt |
| q | Mark direction of rotation before removing. |
| q | removing and fitting → Chapter |