Leon Mk1 Power Unit: 3-Cylinder Fuel-Injection Engine Control Unit
| Assembly overview - engine control unit |
| 1 - | Support |
| q | Bracket secured to battery tray |
| q | Remove bracket from engine control unit → Chapter. |
| 2 - | Bolt without theft protection |
| q | 9 Nm |
| q | For vehicle without theft protection |
| q | Installed on left and right |
| q | Allocation → Electronic Parts Catalogue (ETKA). |
| 3 - | Engine control unit -J623- |
| q | Removing and installing without theft protection → Chapter |
| q | Removing and installing with theft protection → Chapter |
| 4 - | Rivets |
| q | For securing bracket to engine control unit |
| q | Allocation → Electronic Parts Catalogue (ETKA). |
| 5 - | Bolt with theft protection |
| q | 9 Nm |
| q | For vehicles with theft protection |
| q | Installed on left and right |
| q | Tighten shear-head screws evenly until head shears off. |
| q | Allocation → Electronic Parts Catalogue (ETKA). |
