seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Dismantling and assembling pistons and conrods > < Removing and installing engine

Leon Mk1

  • Power unit
  • 4-cyl. diesel engine
  • Enginecrankshaft group, pistons
  • Sealing flanges and engine/drive plate pressure plate/flywheel: removing and installing

Installing
Installing
–  Lightly oil sealing lip of oil seal.
   
–  Fit the seal on the guide hose -T20081/4- and fit the unit over the crankshaft journal.
–  Use the tappet -T20081/1- and press the guide hose-oil seal unit until the oil seal is seated in its position. To do so, use the old vibration dampener securing bolt.
  E13-0013
–  Remove the guide hose -T20081/1-.
–  Install the crankshaft pinion and immobilise it with countersupport -T20018-.
–  Toothed belt, installing and tensioning → Chapter.
–  Install the Poly-V belt → Chapter.
  E13-0014

  • Power unit
  • 4-cyl. diesel engine
  • Enginecrankshaft group, pistons
  • Sealing flanges and engine/drive plate pressure plate/flywheel: removing and installing

Dismantling and assembling pistons and conrods > < Removing and installing engine