Leon Mk1
Dismantling and assembling intake pipes |
1 - | Intake hose |
q | Remove and install with pliers -T20029- for spring-type clips |
2 - | Throttle valve housing |
q | Renew complete only |
q | Removing, installing and checking: → Chapter |
3 - | Seal |
q | Renew if damaged |
4 - | Intake pipes cover |
5 - | Pressure regulating valve |
q | For crankcase breather |
6 - | 10 Nm |
7 - | Gasket |
q | Renew if damaged |
8 - | 25 Nm |
9 - | Exhaust gas recirculation valve |
q | Checking → Chapter |
10 - | Gasket |
q | Renew |
11 - | Intake pipes |
12 - | Intake manifold |
q | Note differing Part No's. |