Leon Mk1
| Removing and installing parts of the ignition system |
Note!| Engine control unit -J220- with connectors → Item |
| 1 - | Connector |
| q | Black, 4 pin |
| q | For ignition transformer -N152- |
| 2 - | Ignition transformer -N152- |
| q | Fitting location → Item |
| q | With markings for ignition cables: |
| A = Cylinder 1 |
| B = Cylinder 3 |
| C = Cylinder 2 |
| D = Cylinder 4 |
| 3 - | 10 Nm |
| 4 - | Connector |
| q | Black, 2-pin |
| q | For knock sensor 1 -G61- |
| q | Sensor and connector contacts are gold-plated |
| 5 - | Knock sensor 1 -G61- |
| q | Fitting location → Item |
| q | Sensor and connector contacts are gold-plated |
| 6 - | 20 Nm |
| q | Tightening torque influences the function of the knock sensor |
| 7 - | Connector |
| q | Black, 3-pin |
| q | Hall sender -G40- |
| 8 - | Hall sender -G40- |
| q | Fitting location → Item |
| 9 - | O-ring |
| q | Renew if damaged |
| 10 - | Spark plug, 30 Nm |
| q | Dismount and assemble with the sparkplug wrench -T20028- |
| q | Type and electrode gap → Chapter, test data, spark plugs |
| 11 - | Bracket |
| q | For ignition transformer -N152- |
| 12 - | H.T. cable |
| q | With suppression connector and spark plug connector |
| q | Resistance 4,8...7,2 kΩ |
