Leon Mk1
Exhaust gas recirculation system components: repair |
1 - | Seal |
q | Replace |
2 - | 10 Nm |
3 - | Union pipe |
4 - | 25 Nm |
5 - | Of the combined valve |
q | Secondary air system → Chapter |
6 - | Exhaust manifold |
7 - | 4 Nm |
8 - | Clamp |
q | According to versions |
9 - | Lambda probe 1 before the catalyst -G39- |
q | Remove and install → Item |
10 - | 6-pin connector |
q | Black, for lambda probe 1 before catalyst -G39- and lambda probe heating -Z19- |
q | On the rear engine support, on the right |
q | Golden contacts |
11 - | 60 Nm |
12 - | Throttle valve control unit -J338- |
13 - | 25 Nm |
14 - | Exhaust gas recirculation valve -N18- with pot. for exhaust gas recirculation -G212- |
15 - | 6-pin connector |
16 - | From the air filter |
17 - | Ventilation hose |