Leon Mk1
Components of the secondary air system: remove and install |
Note!
Secondary air pump relay -J299- → Fig.. |
1 - | Combined valve |
q | Check → Chapter |
2 - | Decompression hose |
3 - | Connector |
q | Bipolar |
4 - | Secondary air injection valve -N112- |
5 - | Towards the pipe connection towards the power brake |
6 - | Secondary air pump relay -J299- |
q | On the relay plate, position 7 |
7 - | O-ring |
q | Replace |
8 - | Pressure hose |
q | Check firm seating |
q | To unlock, tighten the front |
9 - | Intake hose |
q | For secondary air pump |
10 - | From the air filter |
11 - | Motor for secondary air pump -V101- |
12 - | Connector |
q | Bipolar |
13 - | 10 Nm |
14 - | 25 Nm |
15 - | 15 Nm |
16 - | Support |
q | For the motor of the secondary air pump |
q | Fastened to the intake manifold |
17 - | Lower element of the intake manifold |
18 - | 10 Nm |
19 - | Union part |
q | With a socket for the combined valve and the exhaust gas recirculation valve |
20 - | Seal |
q | Replace |
21 - | 25 Nm |
22 - | Exhaust gas recirculation valve -N18- with pot. for exhaust gas recirculation -G212- |
q | Exhaust gas recirculation system → Chapter |
23 - | Threaded connector, 35 Nm |
24 - | 25 Nm |
25 - | Union pipe |
26 - | Towards the connection on the exhaust manifold |
27 - | 10 Nm |