| Removing and installing parts of cooling system |
Note! | t
| When engine is warm the cooling system is under pressure. If necessary release pressure before commencing repairs. |
| t
| Hoses are secured with spring-type clamps. In cases of repair use only spring-type clamps. |
| t
| Pliers -T20029- are recommended when removing and installing spring-type clamps. |
| Perform cooling system leak tests using leak tester -V.A.G 1274- and -V.A.G 1274/4-. |
| Parts of cooling system on body side → Chapter |
| Parts of cooling system on engine side → Chapter |
| Coolant mixture ratios → Chapter, Draining and filling with coolant |
|
|
|
