t
| engine and gearbox support cross member -U-30025B- |
t
| engine/gearbox jack -SAT 1001A- |
–
| Separate the front exhaust pipe fom it connection to the maniold. |
–
| Place the cross member -U-30025B- and separate the rear engine support bolts (disconnect Lambda 2 probe connection). |
–
| Separate the tunnel bridge and double clip that secures the catalytic converter to the central silencer. |
–
| Partially lower the sub-frame cross member with the aid of hydraulic jack -SAT 1001A- (if necessary, separate steering arm securing bolt). |
–
| Separate the thermal shield and remove front exhaust pipe with catalytic converter. |
The rest of the assembly is basically a reverse of the dismantling sequence. |
|
|
|