seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing ancillary bracket > < Engine: assembly and dismantling

Leon Mk1

Bracket for auxiliary units: Assembly overview
   
Bracket for auxiliary units: Assembly overview
  Note
Replace the fixing bolts for the ancillary unit bracket .
–  Fit bolts in the following sequence:
t  Bolts -1- and -2- M10x52.
t  Bolts -3- and -6- M10x30.
t  Bolts -4- and -5- M10x60.
–  Tighten bolts in 4 stages in the sequence shown:
  A13-10534
stage:BoltsTightening torque / turning further angle
1.-1 … 6-Screw in bolts by hand until they make contact
2.-1 … 6-40 Nm
3.-3- and -6-turn 45° further
4.-1, 2, 4, 5-turn 90° further

   

Removing and installing ancillary bracket > < Engine: assembly and dismantling