| Dismantling and assembling engine |
Note | t
| When working on the engine, secure it with engine and gearbox support -VW 540- to support clamp -VW 313- of the assembly stand or to engine and gearbox support -VAS 6095-. |
| t
| Finding metal shavings or a large quantity of small metal particles during engine repair could indicate that the crankshaft bearings or conrod bearings are damaged. To prevent this from causing further damage, perform the following repairs: |
| t
| Thoroughly clean oil channels. |
| t
| Renew oil filter element. |
| Assembly overview - poly V-belt drive → Chapter |
| Removing and installing poly V-belt → Chapter |
| Assembly overview - toothed belt drive → Chapter |
|
|
|
