Leon Mk1
Assembly overview - exhaust gas recirculation |
1 - | Exhaust gas recirculation valve -N18- |
q | Before installing check sealing surfaces on intake manifold for soiling, clean if necessary. |
2 - | 10 Nm |
3 - | O-ring |
q | Renew |
4 - | Intake manifold flap motor -V157- |
5 - | Intake manifold |
6 - | Gasket |
q | Renew |
7 - | Connecting pipe |
q | For exhaust gas recirculation. |
8 - | 25 Nm |
9 - | Radiator |
q | For exhaust gas recirculation. |
10 - | 10 Nm |
11 - | Exhaust manifold |
12 - | From connection |
q | Coolant hose schematic diagram → Chapter. |
13 - | To heat exchanger |
q | Coolant hose schematic diagram → Chapter. |