Leon Mk1
| Assembly overview - front exhaust pipe with catalytic converter and particulate filter |
| 1 - | From turbocharger |
| 2 - | Gasket |
| q | Renew |
| 3 - | 25 Nm |
| q | Renew |
| 4 - | Lambda probe -G39-, 50 Nm |
| q | Grease threads only with high-temperature paste -G 052 112 A3-, high-temperature paste -G 052 112 A3- must not get into the slots of probe body. |
| q | To remove use lambda probe open ring spanner set -3337- |
| 5 - | To pressure differential sender -G505- |
| 6 - | Control line, 45 Nm |
| 7 - | Marking bead |
| q | Push clamp onto marking bead. |
| 8 - | Clamp, 25 Nm |
| 9 - | To exhaust pipe with silencer |
| 10 - | Particulate filter |
| 11 - | Temperature sender before particulate filter -G506-, 45 Nm |
| q | Lubricate thread of sender using high-temperature paste -G 052 112 A3- |
| 12 - | Catalytic converter |
| 13 - | Bolt |
| q | Renew |
| 14 - | Retaining ring |
| q | Renew if damaged. |
| 15 - | Bracket |
| 16 - | 25 Nm |
| 17 - | Front exhaust pipe |
