| When working on the turbocharger, pay careful attention to the following rules of cleanliness: |
| t
| Thoroughly clean all unions and adjacent areas before disconnecting. |
| t
| Place removed parts on a clean surface and cover. Do not use fluffy cloths! |
| t
| Carefully cover opened components or seal if repairs cannot be carried out immediately. |
| t
| Install clean components only. Do not remove replacement parts from packing until immediately before installing. Do not use parts that have not been stored in their packing (e.g. in tool boxes etc.). |
| t
| Existing transport and protective packaging and sealing caps must only be removed immediately prior to installation. |
| t
| When making repairs, remove oil from connection and hose ends. |
| t
| When system is open: do not work with compressed air if this can be avoided. Do not move vehicle unless absolutely necessary. |
|
|
|
