–
| Connect the central diagnosis -VAS 5051B- orcentral diagnosis -VAS 5052- with the relevant cable. |
–
| Start engine and run at idling speed. |
Only when engine does not start: |
Selecting vehicle system: |
–
| Touch the screen on “01 - Engine electronics”. |
The control unit identification and coding are indicated on the display. |
Selecting diagnosis function: |
–
| Touch the screen on “02 - Consult fault memory”. |
–
| If no fault is stored in engine control unit “0 fault(s) detected” is displayed. |
–
| If faults are stored in the engine control unit, they will be displayed as a list. |
–
| Touch the screen on “05 - Erase fault memory”. |
–
| Key in“06 - End data transfer”. |
|
|
|