SEAT Workshop Service and Repair Manuals > Leon Mk1 > Power unit | 4-cylinder engine (2-valve), mechanical stage | Engine assy,cylinder block,crankcase

Enginecrankshaft group, pistons > < Technical data

Attaching engine to repair stand

Consult the equivalence table for tools and equipment according to applicability between Seat / VW / Audi / Skoda → Chapter

Special tools and workshop equipment required

t	counterhold -VW 540-, see equivalent → Anchor

t	Engine/gearbox crane -VAS 6095-, see equivalent → Anchor

Operation process

Note

If operations are to be carried out on the crankshaft or on the sealing flange on the flywheel side, the engine flywheel and intermediate plate must be removed before attaching the engine to the support tool -VW 540- .

–	To perform assembly work, fasten engine to engine and gearbox support -VAS 6095- with holding device -VW 540-.

Power unit
4-cylinder engine (2-valve), mechanical stage
Engine assy,cylinder block,crankcase
Removing and positioning the engine

Enginecrankshaft group, pistons > < Technical data

SEAT Workshop Service and Repair Manuals

Leon Mk1

Power unit 4-cylinder engine (2-valve), mechanical stage Engine assy,cylinder block,crankcase Removing and positioning the engine

Power unit 4-cylinder engine (2-valve), mechanical stage Engine assy,cylinder block,crankcase Removing and positioning the engine

Power unit
4-cylinder engine (2-valve), mechanical stage
Engine assy,cylinder block,crankcase
Removing and positioning the engine

Power unit
4-cylinder engine (2-valve), mechanical stage
Engine assy,cylinder block,crankcase
Removing and positioning the engine