Leon Mk1
Diagram of coolant hose connections: Exploded view of components |
1 - | Radiator/cooler |
q | removing and fitting → Chapter |
q | If replaced, new coolant must be used. |
2 - | Upper coolant pipe |
q | removing and fitting → Chapter |
3 - | Thermostat housing with map-controlled engine cooling thermostat -F265- |
q | removing and fitting → Chapter |
q | Checking thermostat → Chapter |
4 - | Coolant pump |
q | removing and fitting → Chapter |
5 - | Cylinder head and cylinder block |
q | If replaced, new coolant must be used. |
6 - | Bleeder hole |
7 - | Heat exchanger |
q | If replaced, new coolant must be used. |
8 - | Lower coolant pipe |
q | removing and fitting → Chapter |
9 - | Throttle valve control mechanism -J338- |
q | Heated |
10 - | Oil cooler |
removing and fitting → Chapter |
q | If replaced, new coolant must be used. |
11 - | Expansion tank |
q | With cap |
q | Testing pressure relief valve in filler cap → |
12 - | Intake manifold |