SEAT Workshop Service and Repair Manuals > Leon Mk1 > Power unit | 4-cylinder engine (2.0l 4V turbo engine, with direct diesel injection) | Fuel supply, gas operation | Electronic regulation of engine output, electronic accelerator

Accelerator pedal module with accelerator position sender: Removing and installing

t	Removing → Anchor.

t	Installing → Anchor.

Removing

–	Remove the storage on driver's side → Bodywork - Assembly work interior; Rep. gr.68.

–	Disconnect connector -2-.

–	Unscrew bolts -1- and -3-.

–	Remove the accelerator pedal module.

Installing

Reassembly is carried out in the reverse order; note the following:

–	Install the storage on driver's side → Bodywork - Assembly work interior; Rep. gr.68.

Specified torque .

Components:	Nm
Accelerator pedal module to pedal bracket	10

SEAT Workshop Service and Repair Manuals