seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel tank > < Active charcoal tank system

Leon Mk1

Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
Removing
–  Remove fuel delivery unit → Chapter.
   
–  Press together retaining tabs -arrows- and pull off fuel gauge sender upwards.
–  Note colour co-ordination of cables for reinstallation.
  N20-10800
–  Release electrical connectors -1...3- and pull them off. Then bend back the locking devices of the connector.
Fitting:
  A20-10431
–  Connect connectors -1...3-. Observe colour co-ordination.
–  Check connectors are secured properly by pulling.
–  Insert fuel gauge sender -G- into guide on fuel delivery unit and press down until it engages.
–  Install fuel delivery unit → Chapter.
  A20-10431

Fuel tank > < Active charcoal tank system