Leon Mk1
| Active carbon filter system: removing and fitting |
| 1 - | Vent pipe |
| q | Check firm seating |
| q | Of solenoid valve 1 for the active carbon filter -N80- (in the engine compartment) |
| 2 - | Pressure retention valve with connecting hose |
| q | Check firm seating |
| q | Coming from fuel tank gravitational valve |
| 3 - | Breather opening |
| q | Visible from below |
| 4 - | 10 Nm |
| 5 - | Throttle valve module |
| q | With intake silencer |
| 6 - | Solenoid valve 1 for active carbon filter system -N80- |
| q | In engine compartment, right |
| q | Valve closed with ignition switched off |
| q | Valve is activated (pulsed) by engine control unit when engine is warm |
| 7 - | Connector |
| q | Black, 2 contacts |
| 8 - | Active carbon filter |
| q | Location: in right rear wheel housing |
| q | To remove: |
| q | Remove rear right wheel |
| q | Remove wheel housing protection |
| q | Remove pipes → Item and → Item |
| q | Unscrew bolt → Item and remove tank from below |
