seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Valve stem seals: replace > < Valve gear: repairing

Leon Mk1

Removing
Removing
(with cylinder head in place)
–  Remove camshaft → Chapter
–  Remove the plungers and place them on the contact surface face down, making sure you do not interchange them.
–  Take corresponding piston to TDC.
   
–  Use valve removal/fitting tool -T20034B- and adjust mountings to height of studs.
–  Remove valve springs with tool -T20034B- and pressure tool -T20034-/ Ø 35
  Note!
Valves rest on piston crown.
  E15-0024
–  Remove valve stem seals with tool -T20058-
  E15-0063

Valve stem seals: replace > < Valve gear: repairing