seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Engine control unit > < Activated charcoal filter system
Location of the components
   
Location of the components
1 - Fuel pressure regulator
2 - Intake manifold pressure sender -G71- with intake air temperature sender -G42-
3 - Intake manifold
4 - Injector (-N30-…-N33-)
5 - Knock sensor 1 -G61-
q   → Item
6 - Throttle valve control unit -J338-
7 - Engine revs sender -G28-
q   Inductive sender
q   Location: engine block, intake side
8 - Earth connection
9 - 3-pin connector
q   For engine revs sender -G28-
10 - Control unit 4LV -J537-
11 - Ignition transformer -N152-
q   With identification for ignition wiring, do not swap
q   → Item
12 - 6-pin connector
q   Black
q   For lambda probe and lambda probe heating
13 - Coolant temperature sender -G62-
q   With coolant temperature gauge sender -G2-
14 - Exhaust recirculation valve -N18- with pot. for exhaust recirculation -G212-
q   → Chapter
15 - Hall sender -G40-
q   → Item
16 - Lambda probe before the catalyst -G39-, 50 Nm lambda probe after the catalyst -G130-, 50 Nm
q   Location: probe before the catalyst in exhaust manifold, probe after the catalyst, rear part
17 - Activated charcoal filter solenoid valve 1 -N80-
q   In the activated charcoal filter
q   Activated charcoal filter system → Chapter

   

Engine control unit > < Activated charcoal filter system