seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Radiator: removing and fitting > < BaCooling system components: removing and fitting

Leon Mk1

Remove
Remove
–  Remove the soundproofing sump: → Bodywork - fitting work; Rep. Gr.50
–  Detach the coolant hoses from the radiator and drain the coolant → Chapter.
–  Unplug the connector of the heat switch and of the radiator fan.
–  Remove the front bumper: → Bodywork - fitting work; Rep. Gr.63
–  Position the lock holder cover in its operating position. → Bodywork - fitting work; Rep. Gr.50
–  Remove the air duct along with the fan(s).
–  Unscrew the two bolts of the lock holder crossmember that holds the radiator and remove the radiator.
Vehicles with air conditioning:
–  Bear in mind the additional instructions and the fitting work → Chapter.
   

Radiator: removing and fitting > < BaCooling system components: removing and fitting