seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Activated charcoal filter system > < Radiator: removing and fitting

Leon Mk1

Remove
Remove
–  Check the safety instructions before starting the fitting workn → Chapter.
–  First, check whether the vehicle has a coded radio and, if so, check the anti-theft code.
–  With the ignition off, disconnect the battery earth strap.
Commercial vehicles
–  Partially lift the front part of the cargo compartment floor carpet.
   
–  Remove the lower panels -1- from the dividing wall.
–  Remove the front linings -2-.
–  Remove the floor protective plates -3-.
–  Remove the reinforcement beam.
Kombi
–  Fold the rear seat forward.
Continue for all vehicles
–  Remove the cover from the fuel supply unit.
  E20-0068
–  Unplug the connector -1-.
–  Remove the supply and return lines -3- and -4- to the fuel distributor.
–  Detach the supply line -2- to the fuel distributor and the deaeration hose -5-.
  Caution
The fuel supply line is under pressure. Before loosening the hose connections, place a cloth around the connection. Then eliminate the pressure by carefully removing the hose.
  E20-0069
–  Remove the connector nut with spanner -U-40055A-.
  E20-0003
–  Remove the fuel supply unit. To do so turn the unit to the left with the -U-40073- until it comes free from the lower fastening.
  Note!
When replacing the supply unit, empty the old unit before discarding it.
  E20-0070

Activated charcoal filter system > < Radiator: removing and fitting